Anwendungsbereichzum Verkleben und Abdichten unterschiedlichster Materialien; ideal für Haus, Garten, Industrie, Bau und Handwerkfür Beton, Mauerwerk, Putz, Holz, Metalle und Kunststofffür Anschluss- und Bewegungsfugen im Innen- und Außenbereich, speziell für Verfugungen im Hochbaugeeignet für die Abdichtung des inneren und äußeren Fensteranschlusses nach ÖNORM B 5320Produkteigenschaftenhochwertiger Dicht- und Klebstoff auf Basis von Hybrid-Polymerensehr gute Haftung auch auf feuchten Untergründenhöchste DehnfähigkeitAnti-Schimmel-Prüfung nach ISO 846normal entflammbar nach EN 13501zulässige dauerhafte Fugenbewegung: 25 %UV- und alterungsbeständiggute Glättbarkeitneutralvernetzendüberstreichbarhochelastischlösungsmittelfreierfüllt die Anforderungen an ökologische Baustoffe (enthält keine Phthalate, Halogenverbindungen, Flammschutzmittel usw.)sehr emissionsarm – EMICODE EC1 PLUSgeprüfte Lebensmittelverträglichkeit

Anwendungsbereichzum Verkleben und Abdichten unterschiedlichster Materialien; ideal für Haus, Garten, Industrie, Bau und Handwerkfür Beton, Mauerwerk, Putz, Holz, Metalle und Kunststofffür Anschluss- und Bewegungsfugen im Innen- und Außenbereich, speziell für Verfugungen im Hochbaugeeignet für die Abdichtung des inneren und äußeren Fensteranschlusses nach ÖNORM B 5320Produkteigenschaftenhochwertiger Dicht- und Klebstoff auf Basis von Hybrid-Polymerensehr gute Haftung auch auf feuchten Untergründenhöchste DehnfähigkeitAnti-Schimmel-Prüfung nach ISO 846normal entflammbar nach EN 13501zulässige dauerhafte Fugenbewegung: 25 %UV- und alterungsbeständiggute Glättbarkeitneutralvernetzendüberstreichbarhochelastischlösungsmittelfreierfüllt die Anforderungen an ökologische Baustoffe (enthält keine Phthalate, Halogenverbindungen, Flammschutzmittel usw.)sehr emissionsarm – EMICODE EC1 PLUSgeprüfte Lebensmittelverträglichkeit

Anwendungsbereichzum Verkleben und Abdichten unterschiedlichster Materialien; ideal für Haus, Garten, Industrie, Bau und Handwerkfür Beton, Mauerwerk, Putz, Holz, Metalle und Kunststofffür Anschluss- und Bewegungsfugen im Innen- und Außenbereich, speziell für Verfugungen im Hochbaugeeignet für die Abdichtung des inneren und äußeren Fensteranschlusses nach ÖNORM B 5320Produkteigenschaftenhochwertiger Dicht- und Klebstoff auf Basis von Hybrid-Polymerensehr gute Haftung auch auf feuchten Untergründenhöchste DehnfähigkeitAnti-Schimmel-Prüfung nach ISO 846normal entflammbar nach EN 13501zulässige dauerhafte Fugenbewegung: 25 %UV- und alterungsbeständiggute Glättbarkeitneutralvernetzendüberstreichbarhochelastischlösungsmittelfreierfüllt die Anforderungen an ökologische Baustoffe (enthält keine Phthalate, Halogenverbindungen, Flammschutzmittel usw.)sehr emissionsarm – EMICODE EC1 PLUSgeprüfte Lebensmittelverträglichkeit

Anwendungsbereichzum Verkleben und Abdichten unterschiedlichster Materialien; ideal für Haus, Garten, Industrie, Bau und Handwerkfür Beton, Mauerwerk, Putz, Holz, Metalle und Kunststofffür Anschluss- und Bewegungsfugen im Innen- und Außenbereich, speziell für Verfugungen im Hochbaugeeignet für die Abdichtung des inneren und äußeren Fensteranschlusses nach ÖNORM B 5320Produkteigenschaftenhochwertiger Dicht- und Klebstoff auf Basis von Hybrid-Polymerensehr gute Haftung auch auf feuchten Untergründenhöchste DehnfähigkeitAnti-Schimmel-Prüfung nach ISO 846normal entflammbar nach EN 13501zulässige dauerhafte Fugenbewegung: 25 %UV- und alterungsbeständiggute Glättbarkeitneutralvernetzendüberstreichbarhochelastischlösungsmittelfreierfüllt die Anforderungen an ökologische Baustoffe (enthält keine Phthalate, Halogenverbindungen, Flammschutzmittel usw.)sehr emissionsarm – EMICODE EC1 PLUSgeprüfte Lebensmittelverträglichkeit

Ramsauer 131 MULTIFLEX, anthracite grey RAL 7016, 310 ml is suitable for sealing single-pane and insulating glass (also in combination with VSG panes) in wooden, metal and plastic frames. 131 MULTIFLEX is well compatible with VSG foils (PVB). Please consult our application technology department for cast resins and in combination with insulating glass. Suitable for sealing connection and movement joints. Suitable for mirror joints. 131 MULTIFLEX is a ready-to-use, one-component silicone sealant specially developed for window and door construction. The material is UV, weather and ageing resistant. Very good adhesion, even without primers, to glass as well as many metallic substrates and a variety of plastics. When vulcanised, 131 MULTIFLEX is physiologically harmless and inert. General information: It is imperative to observe the expiry date of the material, otherwise the stated mechanical properties of the product can no longer be guaranteed. Attention must be paid to the ambient and substrate temperature. Pre-treatment of the bonding surfaces: The surfaces to be bonded must be load-bearing, dry and free of dust, oil and grease. If necessary, carefully pre-treat the bonding surfaces using a suitable primer. Joint formation: In the case of movement-compensating joints, the dimensions must be designed for the maximum movement absorption. A minimum joint cross-section of 3x5 mm must be observed. The joints must be formed in accordance with the applicable standards and guidelines. Application of the sealant: Ramsauer 131 MULTIFLEX, anthracite grey RAL 7016, 310 ml is to be applied evenly and bubble-free into the joint within the processing temperature. If the substrate is pretreated with primer, its flash-off time must be observed. The smoothing work must be carried out within the specified skin forming time. When finishing, ensure good contact with the bonding surfaces/joint edges (smoothing with Ramsauer smoothing agent). When using smoothing agent, any water streaks that have formed must be removed immediately after sealing, otherwise visual impairments are to be expected. In combination with some paint systems (e.g. linseed oil varnish, stand oil varnish), discolouration of the sealant may occur. Heavy exposure to tobacco smoke or environmental influences can lead to discolouration. Due to the glaze types offered, a self-adhesion test is required.

Ramsauer 131 MULTIFLEX, black , 310 ml is suitable for sealing toughened and insulating glass (also in combination with VSG panes) in wooden, metal and plastic frames. 131 MULTIFLEX is well compatible with laminated safety glass foils (PVB), in case of cast resins and in connection with insulating glass, please consult our application technology. Suitable for sealing connection and movement joints. Suitable for mirror joints. 131 MULTIFLEX is a ready-to-use, one-component silicone sealant specially developed for window and door construction. The material is UV, weather and ageing resistant. Very good adhesion, even without primers, to glass as well as many metallic substrates and a variety of plastics. When vulcanised, 131 MULTIFLEX is physiologically harmless and inert. General information: It is imperative to observe the expiry date of the material, otherwise the stated mechanical properties of the product can no longer be guaranteed. Attention must be paid to the ambient and substrate temperature. Pre-treatment of the bonding surfaces: The surfaces to be bonded must be load-bearing, dry and free of dust, oil and grease. If necessary, carefully pre-treat the bonding surfaces using a suitable primer. Joint formation: In the case of movement-compensating joints, the dimensions must be designed for the maximum movement absorption. A minimum joint cross-section of 3x5 mm must be observed. The joints must be formed in accordance with the applicable standards and guidelines. Application of the sealant: Ramsauer 131 MULTIFLEX, black, 310 ml must be applied evenly and bubble-free into the joint within the application temperature. If the substrate is pretreated with primer, its flash-off time must be observed. The smoothing work must be carried out within the specified skin forming time. When finishing, ensure good contact with the bonding surfaces/joint edges (smoothing with Ramsauer smoothing agent). When using smoothing agent, any water streaks formed must be removed immediately after sealing, otherwise visual impairments are to be expected. In combination with some paint systems (e.g. linseed oil varnish, stand oil varnish), discolouration of the sealant may occur. Heavy exposure to tobacco smoke or environmental influences can lead to discolouration. Due to the glaze types offered, a self-adhesion test is required.

Ramsauer 131 MULTIFLEX, bronce , 310 ml is suitable for sealing single-pane and insulating glass (also in combination with VSG panes) in wooden, metal and plastic frames. 131 MULTIFLEX is well compatible with laminated safety glass foils (PVB). In case of cast resins and in connection with insulating glass, please consult our application technology. Suitable for sealing connection and movement joints. Suitable for mirror joints. 131 MULTIFLEX is a ready-to-use, one-component silicone sealant specially developed for window and door construction. The material is UV, weather and ageing resistant. Very good adhesion, even without primers, to glass as well as many metallic substrates and a variety of plastics. When vulcanised, 131 MULTIFLEX is physiologically harmless and inert. General information: It is imperative to observe the expiry date of the material, otherwise the stated mechanical properties of the product can no longer be guaranteed. Attention must be paid to the ambient and substrate temperature. Pre-treatment of the bonding surfaces: The surfaces to be bonded must be load-bearing, dry and free of dust, oil and grease. If necessary, carefully pre-treat the bonding surfaces using a suitable primer. Joint formation: In the case of movement-compensating joints, the dimensions must be designed for the maximum movement absorption. A minimum joint cross-section of 3x5 mm must be observed. The joints must be formed in accordance with the applicable standards and guidelines. Application of the sealant: Ramsauer 131 MULTIFLEX, bronce , 310 ml must be applied evenly and bubble-free into the joint within the processing temperature. If the substrate is pretreated with primer, its flash-off time must be observed. The smoothing work must be carried out within the specified skin forming time. When finishing, ensure good contact with the bonding surfaces/joint edges (smoothing with Ramsauer smoothing agent). When using smoothing agent, any water streaks formed must be removed immediately after sealing, otherwise visual impairments are to be expected. In combination with some paint systems (e.g. linseed oil varnish, stand oil varnish), discolouration of the sealant may occur. Heavy exposure to tobacco smoke or environmental influences can lead to discolouration. Due to the glaze types offered, a self-adhesion test is required.

Ramsauer 131 MULTIFLEX, cement gray , 310 ml is suitable for sealing single-pane and insulating glass (also in combination with VSG panes) in wood, metal as well as plastic frames. 131 MULTIFLEX is well compatible with laminated safety glass foils (PVB), in case of cast resins and in connection with insulating glass please consult our application technology. Suitable for sealing connection and movement joints. Suitable for mirror joints. 131 MULTIFLEX is a ready-to-use, one-component silicone sealant specially developed for window and door construction. The material is UV, weather and ageing resistant. Very good adhesion, even without primers, to glass as well as many metallic substrates and a variety of plastics. When vulcanized, 131 MULTIFLEX is physiologically harmless and inert. General information: It is imperative to observe the expiration date of the material, otherwise the mechanical properties of the product as stated can no longer be guaranteed. Attention must be paid to the ambient and substrate temperature. Pre-treatment of the bonding surfaces: The surfaces to be bonded must be load-bearing, dry and free of dust, oil and grease. If necessary, carefully pre-treat the bonding surfaces using a suitable primer. Joint formation: In the case of movement-compensating joints, the dimensions must be designed for the maximum movement absorption. A minimum joint cross-section of 3x5 mm must be observed. The joints must be formed in accordance with the applicable standards and guidelines. Application of the sealant: Ramsauer 131 MULTIFLEX, cement gray, 310 ml must be applied to the joint uniformly and without bubbles within the processing temperature. If the substrate is pretreated with primer, its flash-off time must be observed. Smoothing work must be carried out within the specified skin forming time. During finishing work, ensure good contact with the bonding surfaces/joint edges (smoothing with Ramsauer smoothing agent). When using smoothing agent, any water streaks formed must be removed immediately after sealing, otherwise visual impairments are to be expected. In combination with some paint systems (e.g. linseed oil varnish, stand oil varnish), discoloration of the sealant may occur. Heavy exposure to tobacco smoke or environmental influences may lead to discoloration. Due to the glaze types offered, a self-adhesion test is required.

Ramsauer 131 MULTIFLEX, milky transparent , 310 ml is suitable for sealing single-pane and insulating glass (also in combination with VSG panes) in wooden, metal and plastic frames. 131 MULTIFLEX is well compatible with laminated safety glass foils (PVB). In case of cast resins and in connection with insulating glass, please consult our application technology. Suitable for sealing connection and movement joints. Suitable for mirror joints. 131 MULTIFLEX is a ready-to-use, one-component silicone sealant specially developed for window and door construction. The material is UV, weather and ageing resistant. Very good adhesion, even without primers, to glass as well as many metallic substrates and a variety of plastics. When vulcanised, 131 MULTIFLEX is physiologically harmless and inert. General information: It is imperative to observe the expiry date of the material, otherwise the stated mechanical properties of the product can no longer be guaranteed. Attention must be paid to the ambient and substrate temperature. Pre-treatment of the bonding surfaces: The surfaces to be bonded must be load-bearing, dry and free of dust, oil and grease. If necessary, carefully pre-treat the bonding surfaces using a suitable primer. Joint formation: In the case of movement-compensating joints, the dimensions must be designed for the maximum movement absorption. A minimum joint cross-section of 3x5 mm must be observed. The joints must be formed in accordance with the applicable standards and guidelines. Application of the sealant: Ramsauer 131 MULTIFLEX, milky transparent, 310 ml must be applied evenly and bubble-free into the joint within the application temperature. If the substrate is pretreated with primer, its flash-off time must be observed. The smoothing work must be carried out within the specified skin forming time. When finishing, ensure good contact with the bonding surfaces/joint edges (smoothing with Ramsauer smoothing agent). When using smoothing agent, any water streaks formed must be removed immediately after sealing, otherwise visual impairments are to be expected. In combination with some paint systems (e.g. linseed oil varnish, stand oil varnish), discolouration of the sealant may occur. Heavy exposure to tobacco smoke or environmental influences can lead to discolouration. Due to the glaze types offered, a self-adhesion test is required.

Ramsauer 131 MULTIFLEX, RAL 9002 gray-white , 310 ml is suitable for sealing single-pane and insulating glass (also in combination with VSG panes) in wood, metal as well as plastic frames. 131 MULTIFLEX is well compatible with VSG foils (PVB), in case of cast resins and in connection with insulating glasses please consult our application technology. Suitable for sealing connection and movement joints. Suitable for mirror joints. 131 MULTIFLEX is a ready-to-use, one-component silicone sealant specially developed for window and door construction. The material is UV, weather and ageing resistant. Very good adhesion, even without primers, to glass as well as many metallic substrates and a variety of plastics. When vulcanized, 131 MULTIFLEX is physiologically harmless and inert. General information: It is imperative to observe the expiration date of the material, otherwise the mechanical properties of the product as stated can no longer be guaranteed. Attention must be paid to the ambient and substrate temperature. Pre-treatment of the bonding surfaces: The surfaces to be bonded must be load-bearing, dry and free of dust, oil and grease. If necessary, carefully pre-treat the bonding surfaces using a suitable primer. Joint formation: In the case of movement-compensating joints, the dimensions must be designed for the maximum movement absorption. A minimum joint cross-section of 3x5 mm must be observed. The joints must be formed in accordance with the applicable standards and guidelines. Application of the sealant: Ramsauer 131 MULTIFLEX, RAL 9002 gray-white, 310 ml must be applied to the joint uniformly and bubble-free within the processing temperature. If the substrate is pretreated with primer, its flash-off time must be observed. Smoothing work must be carried out within the specified skin forming time. During finishing work, ensure good contact with the bonding surfaces/joint edges (smoothing with Ramsauer smoothing agent). When using smoothing agent, any water streaks formed must be removed immediately after sealing, otherwise visual impairments are to be expected. In combination with some paint systems (e.g. linseed oil varnish, stand oil varnish), discoloration of the sealant may occur. Heavy exposure to tobacco smoke or environmental influences may lead to discoloration. Due to the glaze types offered, a self-adhesion test is required.

Ramsauer 131 MULTIFLEX, transparent , 310 ml is suitable for sealing single-pane and insulating glass (also in combination with VSG panes) in wooden, metal and plastic frames. 131 MULTIFLEX is well compatible with laminated safety glass foils (PVB). In case of cast resins and in connection with insulating glass, please consult our application technology. Suitable for sealing connection and movement joints. Suitable for mirror joints. 131 MULTIFLEX is a ready-to-use, one-component silicone sealant specially developed for window and door construction. The material is UV, weather and ageing resistant. Very good adhesion, even without primers, to glass as well as many metallic substrates and a variety of plastics. When vulcanised, 131 MULTIFLEX is physiologically harmless and inert. General information: It is imperative to observe the expiry date of the material, otherwise the stated mechanical properties of the product can no longer be guaranteed. Attention must be paid to the ambient and substrate temperature. Pre-treatment of the bonding surfaces: The surfaces to be bonded must be load-bearing, dry and free of dust, oil and grease. If necessary, carefully pre-treat the bonding surfaces using a suitable primer. Joint formation: In the case of movement-compensating joints, the dimensions must be designed for the maximum movement absorption. A minimum joint cross-section of 3x5 mm must be observed. The joints must be formed in accordance with the applicable standards and guidelines. Application of the sealant: Ramsauer 131 MULTIFLEX, transparent, 310 ml must be applied evenly and bubble-free into the joint within the application temperature. If the substrate is pretreated with primer, its flash-off time must be observed. The smoothing work must be carried out within the specified skin forming time. When finishing, ensure good contact with the bonding surfaces/joint edges (smoothing with Ramsauer smoothing agent). When using smoothing agent, any water streaks that have formed must be removed immediately after sealing, otherwise visual impairments are to be expected. In combination with some paint systems (e.g. linseed oil varnish, stand oil varnish), discolouration of the sealant may occur. Heavy exposure to tobacco smoke or environmental influences can lead to discolouration. Due to the glaze types offered, a self-adhesion test is required.

Ramsauer 131 MULTIFLEX, white , 310 ml is suitable for sealing single-pane and insulating glass (also in combination with VSG panes) in wooden, metal and plastic frames. 131 MULTIFLEX is well compatible with VSG foils (PVB), please consult our application technology department for cast resins and in connection with insulating glass. Suitable for sealing connection and movement joints. Suitable for mirror joints. 131 MULTIFLEX is a ready-to-use, one-component silicone sealant specially developed for window and door construction. The material is UV, weather and ageing resistant. Very good adhesion, even without primers, to glass as well as many metallic substrates and a variety of plastics. When vulcanised, 131 MULTIFLEX is physiologically harmless and inert. General information: It is imperative to observe the expiry date of the material, otherwise the stated mechanical properties of the product can no longer be guaranteed. Attention must be paid to the ambient and substrate temperature. Pre-treatment of the bonding surfaces: The surfaces to be bonded must be load-bearing, dry and free of dust, oil and grease. If necessary, carefully pre-treat the bonding surfaces using a suitable primer. Joint formation: In the case of movement-compensating joints, the dimensions must be designed for the maximum movement absorption. A minimum joint cross-section of 3x5 mm must be observed. The joints must be formed in accordance with the applicable standards and guidelines. Application of the sealant: Ramsauer 131 MULTIFLEX, white, 310 ml must be applied evenly and bubble-free into the joint within the application temperature. If the substrate is pretreated with primer, its flash-off time must be observed. The smoothing work must be carried out within the specified skin forming time. When finishing, ensure good contact with the bonding surfaces/joint edges (smoothing with Ramsauer smoothing agent). When using smoothing agent, any water streaks formed must be removed immediately after sealing, otherwise visual impairments are to be expected. In combination with some paint systems (e.g. linseed oil varnish, stand oil varnish), discolouration of the sealant may occur. Heavy exposure to tobacco smoke or environmental influences can lead to discolouration. Due to the glaze types offered, a self-adhesion test is required.