Properties: - Colour: Transparent - Odourless - Excellent adhesion to many substrates - High mechanical resistance - Very good weathering, ageing and UV resistance - Resistant to common cleaning agents and many chemicals - Temperature resistance: -50°C to +180°C (up to +180°C for short periods) - Resistant to mould and bacteria - Not suitable for natural stone and non-lacquered metals Application: The parts to be bonded must be clean, dry and free of grease. The product is applied with a standard cartridge gun. After application, the product should be smoothed out with a suitable tool. Skin formation begins after about 10 minutes. Complete curing takes place within 1-3 days, depending on the layer thickness and the ambient conditions. Safety instructions: Avoid contact with skin and eyes. In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. Keep out of the reach of children. Use only in well ventilated areas. Disposal: Residues of Ramsauer 110 Acetate can be disposed of as construction waste. Empty cartridges are recyclable material and can be recycled. Scope of delivery: 1 x Ramsauer 110 Acetate 310 ml cartridge.

Properties: - Colour: Transparent - Odourless - Excellent adhesion to many substrates - High mechanical resistance - Very good weathering, ageing and UV resistance - Resistant to common cleaning agents and many chemicals - Temperature resistance: -50°C to +180°C (up to +180°C for short periods) - Resistant to mould and bacteria - Not suitable for natural stone and non-lacquered metals Application: The parts to be bonded must be clean, dry and free of grease. The product is applied with a standard cartridge gun. After application, the product should be smoothed out with a suitable tool. Skin formation begins after about 10 minutes. Complete curing takes place within 1-3 days, depending on the layer thickness and the ambient conditions. Safety instructions: Avoid contact with skin and eyes. In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. Keep out of the reach of children. Use only in well ventilated areas. Disposal: Residues of Ramsauer 110 Acetate can be disposed of as construction waste. Empty cartridges are recyclable material and can be recycled. Scope of delivery: 1 x Ramsauer 110 Acetate 310 ml cartridge.

Properties: - Colour: Transparent - Odourless - Excellent adhesion to many substrates - High mechanical resistance - Very good weathering, ageing and UV resistance - Resistant to common cleaning agents and many chemicals - Temperature resistance: -50°C to +180°C (up to +180°C for short periods) - Resistant to mould and bacteria - Not suitable for natural stone and non-lacquered metals Application: The parts to be bonded must be clean, dry and free of grease. The product is applied with a standard cartridge gun. After application, the product should be smoothed out with a suitable tool. Skin formation begins after about 10 minutes. Complete curing takes place within 1-3 days, depending on the layer thickness and the ambient conditions. Safety instructions: Avoid contact with skin and eyes. In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. Keep out of the reach of children. Use only in well ventilated areas. Disposal: Residues of Ramsauer 110 Acetate can be disposed of as construction waste. Empty cartridges are recyclable material and can be recycled. Scope of delivery: 1 x Ramsauer 110 Acetate 310 ml cartridge.

Properties: - Colour: Transparent - Odourless - Excellent adhesion to many substrates - High mechanical resistance - Very good weathering, ageing and UV resistance - Resistant to common cleaning agents and many chemicals - Temperature resistance: -50°C to +180°C (up to +180°C for short periods) - Resistant to mould and bacteria - Not suitable for natural stone and non-lacquered metals Application: The parts to be bonded must be clean, dry and free of grease. The product is applied with a standard cartridge gun. After application, the product should be smoothed out with a suitable tool. Skin formation begins after about 10 minutes. Complete curing takes place within 1-3 days, depending on the layer thickness and the ambient conditions. Safety instructions: Avoid contact with skin and eyes. In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. Keep out of the reach of children. Use only in well ventilated areas. Disposal: Residues of Ramsauer 110 Acetate can be disposed of as construction waste. Empty cartridges are recyclable material and can be recycled. Scope of delivery: 1 x Ramsauer 110 Acetate 310 ml cartridge.

Properties: - Colour: Transparent - Odourless - Excellent adhesion to many substrates - High mechanical resistance - Very good weathering, ageing and UV resistance - Resistant to common cleaning agents and many chemicals - Temperature resistance: -50°C to +180°C (up to +180°C for short periods) - Resistant to mould and bacteria - Not suitable for natural stone and non-lacquered metals Application: The parts to be bonded must be clean, dry and free of grease. The product is applied with a standard cartridge gun. After application, the product should be smoothed out with a suitable tool. Skin formation begins after about 10 minutes. Complete curing takes place within 1-3 days, depending on the layer thickness and the ambient conditions. Safety instructions: Avoid contact with skin and eyes. In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. Keep out of the reach of children. Use only in well ventilated areas. Disposal: Residues of Ramsauer 110 Acetate can be disposed of as construction waste. Empty cartridges are recyclable material and can be recycled. Scope of delivery: 1 x Ramsauer 110 Acetate 310 ml cartridge.

Properties: - Colour: Transparent - Odourless - Excellent adhesion to many substrates - High mechanical resistance - Very good weathering, ageing and UV resistance - Resistant to common cleaning agents and many chemicals - Temperature resistance: -50°C to +180°C (up to +180°C for short periods) - Resistant to mould and bacteria - Not suitable for natural stone and non-lacquered metals Application: The parts to be bonded must be clean, dry and free of grease. The product is applied with a standard cartridge gun. After application, the product should be smoothed out with a suitable tool. Skin formation begins after about 10 minutes. Complete curing takes place within 1-3 days, depending on the layer thickness and the ambient conditions. Safety instructions: Avoid contact with skin and eyes. In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. Keep out of the reach of children. Use only in well ventilated areas. Disposal: Residues of Ramsauer 110 Acetate can be disposed of as construction waste. Empty cartridges are recyclable material and can be recycled. Scope of delivery: 1 x Ramsauer 110 Acetate 310 ml cartridge.